FALCON SHOCKS ABSORBERS LTD., have been in the business of designing and  manufacturing shock absorbers for competition motorcycles since 1977, and during that period their policy of continual development and improvement in their products has brought them to the forefront in the competition world. Each pair of suspension units is hand built to suit each customer's requirements and is set up to ensure that it not only performs as it should do but is consistently reliable over a long service life. Their units are designed around a high tensile steel 12 mm dia. hardchrome plated piston rod for strength and durability, and used in conjunction with a P.T.F.E. rod bearing and piston rings ensure low wear rates and consequently an extended working life.

 

All FALCON SHOCK ABSORBERS are designed to be easily rebuilt, so that in the event of damage an economic repair to original condition is easily possible. Since their original excursion into shock absorber design and manufacture in 1977 they have built shock absorbers for all aspects of motorcycle sport, starting with motocross suspension they then moved on to Trials, Grasstrack and Longtrack, Road Racing and quad suspension. During their long career in producing competition motorcycles suspension units they have been used successfully by many hundreds of riders in all the varied aspects of motorcycle sport.

 

TWIN SHOCK MOTOCROSS 1960s - 1981

A full range of Falcon suspension units for motocross bikes of this era have been built to include and update many of the features that become necessary in the late 1970’s and early 1980’s when long travel suspension was introduced.   The dampers have been designed with large bore 36 mm bodies, to hold more oil so that the units run cooler for longer and a twin spring set up to help get just the right feel to your suspension. The fully rebuildable dampers have bearings and seals of P.T.F.E. for low friction and low wear rate, and induction hardened rods to resist damage from stones chips etc.   The damping system has been evolved over the last five years to provide a super smooth damping action which again helps the shock to run cooler.   The piston design includes for high medium and low speed damping for both compression and rebound damping, and because they are, independently adjustable it means that the damping can be set up to individual needs. We produce two types of damper for this range:- a straight damper with the gas chamber in the top of the damper body or the piggy back style where the gas reservoir is on a bracket at the side of the shock body.   This type of shock not only allows us to almost double the oil volume but because the reservoir is away from the shock body it dissipates heat better. The end result being a shock that runs cooler so that damping characteristics remain more constant with no damper fade.   The Falcon twinshocks of this type are available in lengths from 350 mm centres to 445 mm centres from stock, but can be built to fit most bikes and riders. Both types of shock absorber are finished with gold colour damper bodies and black springs.

 

The above Falcons are the 36 mm aluminum body type with a screw type adjuster.

Call for specs and pricing!

Talon sprockets

This are the new style rear sprocket  without the multi hole drilling made specifically for us by Talon. They are available for all years for $59.95 in all sizes. Backing plate pricing is available upon request

All prices are in US dollars

• 75-82 12, 13, 14 tooth are $29.95

• 82 and up 12, 13, 14 tooth are  $29.95

• Rears all years 54, 56, 58 tooth are  $ 59.95

Shipping and handling is extra depending on location.

Wheels, Rims & Spokes

Complete wheels, rims and spokes!

These rims are made on the old Akront dies under a new name. Manufacured to the same quality and tolerances these should satisfy any serious racer or collector, also available are the shouldered style early Akronts as well as the original "Radaelli" rims in either chromed steel or polished stainless, call for pricing.

Aftermarket plastic side panel and fenders

European made air filters

Ignition Covers

Cables

Frame Number Plates

For the restorer who wants everything  perfect we have the original number and letter stamps in metric and will duplicate the messed up originals with new plates numbered to your old plates. Just send in the old plates and $37.50 or call for details. The old plates are returned with your new plates along with the correct rivets to install them. Price includes return mail.